AN5116-06B Hybrid Platform
FiberHome OLT Series
Key facts
- Part number
- AN5116-06B Hybrid Platform
- Brand
- Unbranded / unknown
- Category
- Fibre cables
- Price
- Contact us for pricing
- Availability
- On request — ask for a quote
The AN5116-06B Hybrid Platform is a fibre cable listed on tprice.co. Request a quote for volume pricing, or sell us your used fibre cables.
Overview
AN5116-06B is a new intelligent carrier-class MSAN/GPON/10G PON integrated access product offered by FiberHome. It is large carrier-class central office equipment. It is being used and works together with the remote end ONUs (Optical Network Unit) as an office end OLTs (Optical Line Terminal) in MSAN/GPON/10G PON system. Besides, it supports integrated broadband / narrowband services, such as POTS/ADSL2+/ VDSL2/ VoIP/ TDM/ data/ IPTV/ CATV. It converges Layer 2 and Layer 3 data.
AN5116-06B Hybrid Platform provides these key features and benefits:
Super Access Ability
High capacity and Density carrier-class GPON platforms supporting 256 GPON ports or 64 XGPON ports, switch card capacity of 3.84T and backplane bus capacity of 5.12T
Support 6GE /110GE + 4GE/ 210GE + 2GE/410GE（optical or electrical).
Support STM-1/E1 private uplink interface and up to 16×16GE downlink P2P interfaces.
It has capability to support split-ratio of 1:32/64/128 long haul transmission and CLASS C+ optical module.
Multi-service Access
Provide Internet/ Voice/ IPTV/ CATV/ TDM services.
Support IEEE 1588v2 protocol and 1PPS+TOD Clock interface.
Support OSPF, VRRP and RIP L3 protocols.
Unified platform of MSAN/GPON/10G PON/P2P for FTTX Smooth evolution.
High Reliability Optimization Design
Standard 19” inches cabinet supporting 16 service slots.
Full front card and front access design.
Support hot plug for all cards and PON modules.
Support redundancy error-check protection for services, controller and uplink cards.
End-to-end protection, uplink ports RSTP/LACP protection and downlink PON port millisecond level switch protection.
Green Energy
The overall power consumption is lower than the average industry level
Use the high performance and low power consumption chip.
8-level intelligent temperature control fan and support idle ports sleeping mode and energy saving.
Typical Application Scenarios
The AN5116-06B is suitable for the application of FTTH / FTTB / FTTC / FTTM/ etc., and it is usually placed in a residential community or a central office.
An illustration of the AN5116-06B network diagram is shown in Figure.
Get More Information
Do you have any question about the AN5116-06B Hybrid Platform
Specifications
General
- Core switch card capacity
- 408Gbit/s (equipped with the HSWA card) 960Gbit/s (equipped with the HSWD card)
- Backplane bus capacity
- 5.12Tbit/s
- Maximum transmission distance
- 20km
- Maximum split ratio of EPON
- 1:64
- Maximum split ratio of 10G EPON
- 1:128
- Maximum split ratio of GPON
- 1:128
- Core switch card active / standby switching time
- ＜50ms
- Active/standby switching time for the uplink card
- ＜50ms
- Optical protection switching time (TYPEB / TYPEC / TYPED)
- ＜50ms
Price history
No price history has been recorded for this part yet.
Why buy from Prology
- Tested before dispatchEvery item is checked by our technicians before it ships.
- Warranty includedParts are covered by a Prology warranty – ask us for the terms.
- Fast shippingDispatched from our Australian and US locations.
- Real people, quick repliesQuotes and answers within 1 business day.
Request a quote for AN5116-06B Hybrid Platform
Tell us the quantity and condition you need. Prology replies with a firm price and lead time within 1 business day.