ATEN KVA-VE1812R

The VE1812R features Power over HDBaseT (PoH) which sends power from Tx to Rx over Cat 5e / 6 / 6a cable without any additional power supply. The VE1812R supports RS-232 and IR signaling pass-through, allowing users to control the HDMI source device from the receiver unit (VE1812R) while also accessing the HDMI display device from the transmitter unit (VE1812T). The IR signals can also be extended in both directions.

Bi-directional RS-232 channel – allows you to connect to serial terminals or serial devices, such as touch screens and barcode scanners

Bi-directional IR channel – Two way IR protocol delivery by one IR port; IR transmission is processed one direction at a time

Rack- Mountable

Video Output

Interfaces 1 x HDMI Type A Female (Black)

Impedance 100 Ω

Max. Distance 3 m

Video

Max. Data Rate 10.2Gbps (3.4Gbps per lane)

Max. Pixel Clock 340 MHz

Compliance HDMI (3D, Deep Color, 4K)

HDCP2.2 Compatible

Consumer Electronics Control (CEC)

Max. Resolutions / Distance Up to 4K@70m (Cat 5e/6) / 100m (Cat 6a/ATEN 2L-2910 Cat6); 1080p@100m (Cat 5e/6/6a)

*4K supported:

4096 x 2160 / 3840 x 2160 @ 60Hz (4:2:0);

4096 x 2160 / 3840 x 2160 @ 30Hz (4:4:4)

Audio

Output 1 x HDMI Type A Female (Black)

Connectors

Unit To Unit 1 x RJ-45 Female

Power 1 x DC Jack (Black) with locking

or 1 x RJ-45 (Power Over HDBaseT, POH)

Control

RS-232 Connector: 1 x Terminal Block, 3 pole

Baud Rate: 19200, Data Bits:8,

Stop Bits:1, no parity and flow control

IR 1 x Mini Stereo Jack Female (Black)

Switches

Long Reach Mode Switch 1 x Slide Switch - ON/OFF

Firmware Upgrade 1 x Slide Switch - ON/OFF

Power Consumption DC5V:4.26W:20BTU

POH:5.33W:25BTU

Environmental

Operating Temperature 0 - 40°C

Storage Temperature -20 - 60°C

Humidity 0 - 80% RH, Non-Condensing

Physical Properties

Housing Metal