Cisco AIR-AP1852I-UXK9
Aironet 1850 Series Access Points, 4 x 4 MU-MIMO, 1.73Gbps bandwidth, WAVE 2
Key facts
- Part number
- AIR-AP1852I-UXK9
- Brand
- Cisco
- Category
- Wireless
- Price
- Contact us for pricing
- Availability
- On request — ask for a quote
The Cisco AIR-AP1852I-UXK9 is a wireless listed on tprice.co. Request a quote for volume pricing, or sell us your used wireless.
Overview
The Cisco AIR-AP1852I-UXK9 Aironet 1850 Series Access Points are designed to support the high demands of enterprise environments. With 4x4 MU-MIMO technology, these access points facilitate multiple-user efficiency and enhanced throughput, supporting bandwidths up to 1.73Gbps. They are equipped with WAVE 2 and 802.11a/g/n/ac wireless standards, ensuring robust connectivity and extensive range. Ideal for high-density scenarios, the AIR-AP1852I-UXK9 enhances user experience by providing consistent, high-speed access across multiple devices simultaneously. Perfect for businesses seeking scalable, secure, and reliable wireless solutions.
Specifications
General
- Description
- Cisco Aironet 1850 Series Access Points AIR-AP1852I-UXK9, 4 x 4 MU-MIMO, 1.73Gbps bandwidth, WAVE 2, 802.11a/g/n/ac
- Software
- Cisco Unified Wireless Network Software Release with AireOS wireless controllers: 8.1 MR1 or later for the Cisco Aironet 1850 Series Access Points
- Regulatory Domain
- Universal Regulatory Domain
- Deployment modes
- Centralized local, Standalone, Sniffer, Cisco FlexConnect, Monitor, OfficeExtend, Mesh
- Supported wireless LAN controllers
- Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 5760 Series Wireless Controllers, Cisco Catalyst 3650/3850 Series switch with integrated controller Cisco Mobility Express
- 802.11n version 2.0 (and related) capabilities
- 4x4 MIMO with four spatial streams Maximal ratio combining (MRC) 20- and 40-MHz channels PHY data rates up to 600 Mbps (40 MHz with 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) 802.11 dynamic frequency selection (DFS) Cyclic shift diversity (CSD) support
- 802.11ac Wave 1 and 2 capabilities
- 4x4 MIMO with four spatial streams, single-user MIMO 4x4 MIMO with three spatial streams, multiuser MIMO MRC 802.11ac beamforming (transmit beamforming) 20-, 40-, and 80-MHz channels PHY data rates up to 1.7 Gbps (80 MHz in 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) 802.11 DFS CSD support Rogue device detection
- Integrated antenna
- 2.4 GHz, gain 3 dBi, internal omni, horizontal beamwidth 360° 5 GHz, gain 5 dBi, internal omni, horizontal beamwidth 360°
- Interfaces
- 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE) 1 x 10/100/1000BASE-T autosensing (RJ-45), AUX (used for Link Aggregation) Management console port (RJ-45) USB 2.0 (enabled via future software)
- Indicators
- Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
- Dimensions (W x L x H)
- Access point (without mounting bracket): 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm)
- Weight
- 3.12 lb (1.41 kg)
- Environmental
- Cisco Aironet 1850i Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) Nonoperating (storage) altitude test: 25˚C, 15,000 ft. Operating temperature: 32° to 104°F (0° to 40°C) Operating humidity: 10% to 90% (noncondensing) Operating altitude test: 40˚C, 9843 ft.
- System memory
- 1 GB DRAM 256 MB flash
- Input power requirements
- AP1850: 44 to 57 VDC Power supply and power injector: 100 to 240 VAC; 50 to 60 Hz
- Power draw
- 20.9W Note: When deployed using a Power over Ethernet (PoE) specification, the power drawn from the power sourcing equipment will be higher by some amount, depending on the length of the interconnecting cable.
- Powering options
- 802.3at Enhanced PoE Cisco power injector, AIR-PWRINJ4= Cisco local power supply, AIR-PWR-C= Cisco power injector, AIR-PWRINJ5= (Note:this injector supports 802.3af only) 802.3af Note: If 802.3af PoE is the source of power, (1) the 1852e 2.4-GHz radio will shift to 2x3 from 3x4, (2) The USB port and AUX Ethernet port are disabled on both the 1852i and 1852e.
- Warranty
- Limited lifetime hardware warranty
Price history
No price history has been recorded for this part yet.
Why buy from Prology
- Tested before dispatchEvery item is checked by our technicians before it ships.
- Warranty includedParts are covered by a Prology warranty – ask us for the terms.
- Fast shippingDispatched from our Australian and US locations.
- Real people, quick repliesQuotes and answers within 1 business day.
Request a quote for AIR-AP1852I-UXK9
Tell us the quantity and condition you need. Prology replies with a firm price and lead time within 1 business day.