HPE DL20 Gen10 2LFF P06961-B21

P06961-B21 is the HPE ProLiant DL20 Gen10 Non-hot Plug 2LFF Configure-to-order Server. The dense and compact HPE ProLiant DL20 Gen10 Server powered by Intel® Xeon® E Processor, Pentium and Core i3 processors provides a unique blend of enterprise class capabilities & value. It offers outstanding configuration flexibility to cater to a wide variety of business requirements at an affordable price point. Deploy this dense platform for diverse workloads in space constrained environments and maintain it with ease by automating the most essential server lifecycle management tasks with HPE iLO 5.

Table 1 shows the quick spec.

Figure 1 shows the HPE DL20 Gen10 2LFF front panel.

Note:

Figure 2 shows the HPE DL20 Gen10 rear panel.

Configuration Information

This section lists some of the steps required to configure a Factory Integrated Model.

To ensure valid configurations are ordered, Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales representative for information on configurable product offerings and requirements.

1. Factory Integrated Models must start with a CTO Server.

1. FIO indicates that this option is only available as a factory installable option.

1. All Factory Integrated Models will be populated with sufficient hard drive blanks based on number of drives ordered with server.

1. Some options may not be integrated at the factory. Contact our sales for additional information

Step 1: Base Configuration (choose one of the following configurable models)

Step 2a: Choose Processor Options

Please select one –L21 processor required below.

NOTE: Only one processor supported.

NOTE: DDR4 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.

Step 2b: Choose Memory Options

Please select one or more memory from below.

NOTE: HPE memory from previous generation servers is not qualified or warranted with this HPE ProLiant Server.

NOTE: HPE Standard Memory (UDIMM) is required to realize the memory performance improvements and enhanced functionality listed in this document for this HPE ProLiant Server.

NOTE: With one processor installed, four DIMMs slots are available.

Step 2c: Choose Power Supplies

Please select one or two power supplies from below.

NOTE: Mixing of 2 different power supplies are NOT allowed.

Step 2d: Choose Riser Cards

NOTE: It is mandatory to choose one Riser Card from selections below:

Step 3: Choose Additional (FIO) Factory Integratable Options

Each of the following may be selected if desired at time of factory integration

Step 4: Choose Additional Options for Factory Integration from Core and Additional Option sections via the datasheet.

Get More Information

Do you have any question about the P06961-B21