Huawei FusionServer RH8100 V3 Rack Server
Key facts
- Part number
- Huawei FusionServer RH8100 V3 Rack Server
- Brand
- Unbranded / unknown
- Category
- Rack servers
- Price
- Contact us for pricing
- Availability
- On request — ask for a quote
The Huawei FusionServer RH8100 V3 Rack Server is a rack server listed on tprice.co. Request a quote for volume pricing, or sell us your used rack servers.
Overview
Huawei new-generation FusionServer RH8100 V3 flagship rack server delivers industry-leading architecture to provide robust computing performance and extensibility, it is ideal for mission-critical application with superb performance. This 8U rack server supports up to 8 Intel Xeon E7-8800 series processors, 192 DIMMs, 24*2.5” SAS/SATA disks, 18 PCIe 3.0 slots, and 2 LOM mezzanine cards, 8 hot-swappable fan modules in N+ 1 redundancy and 4 hot-swappable power modules, the modularity design and fault diagnosis LCD touch panel provide simple and tool-free maintenance. Huawei Hi11710 BMC chip build-in provides comprehensive remote device management, monitoring, configuration, and fault locating and analysis.
Quick Specs
Table 1 shows the Quick Specs.
Figure 1 shows the appearance of Huawei FusionServer RH8100 V3 Rack Server. The RH8100 V3 provides three front I/O modules:
Figure 1-1 shows the RH8100 V3 with the FM-A.
The front I/O module of model A (FM-A) provides performance-balanced configuration. The FM-A supports a maximum of 12 SAS HDDs, SATA HDDs, or SSDs, two RAID controller cards, and six standard PCIe slots on PCIe riser cards. The PCIe slots do not support standard cards that need to connect to external cables, such as, NICs, HBAs, IBs. You can install PCIe SSDs and GPUs in the slots.
Figure 1-2 shows the RH8100 V3 with the FM-B.
The front I/O module of model B (FM-B) provides storage-enhanced configuration. The FM-B supports a maximum of 24 SAS HDDs, SATA HDDs, or SSDs and two RAID controller cards. It does not support standard PCIe slots.
Figure 1-3 shows the RH8100 V3 with the FM-C.
The front I/O module of model C (FM-C) provides low-level configuration. The FM-C supports a maximum of eight SAS HDDs, SATA HDDs, or SSDs and two RAID controller cards. It does not support standard PCIe slots.
Figure 1-4 shows the RH8100 V3 with the FM-D.
The front I/O module of model D (FM-D) supports NVMe PCIe SSDs. The FM-D supports a maximum of eight SAS HDDs, SATA HDDs, SSDs, or NVMe PCIe SSDs and two RAID controller cards, but does not support standard PCIe slots. NVMe PCIe SSDs do not support RAID. If NVMe PCIe SSDs are installed in all disk slots, no RAID controller cards need to be configured on the server.
Figure 2 shows the front panel of Huawei FusionServer RH8100 V3 Rack Server.
Figure 2-1 RH8100 V3 front panel with the FM-A.
Note:
Figure 2-2 RH8100 V3 front panel with the FM-B
Figure 2-3 RH8100 V3 front panel with the FM-C.
Figure 2-4 RH8100 V3 front panel with the FM-D.
Figure 3 shows the back panel of Huawei FusionServer RH8100 V3 Rack Server.
Compare to Similar Items
Table 3 shows the comparison of Huawei FusionServer RH8100 V3 Rack Server and Huawei FusionServer RH5885H V3 Rack Server.
Get more information
Do you have any question about the Huawei FusionServer RH8100 V3 Rack Server
Specifications
General
- Form factor
- 8U rack server without holding rails.
- Chipset
- Intel Patsburg PCH-J (C602-J).
- Number of DIMM slots
- Up to 192 DIMM slots in 16 memory boards (Each processor supports two memory boards.) E7 v2: supports only DDR3 DIMMs and memory boards. E7 v3/v4: supports only DDR4 DIMMs and memory boards. NOTE: 192 DIMM slots are supported only when you use the 12-DIMM memory boards.
- Maximum memory capacity
- 12 TB (using 64 GB DIMMs).
- Number of hard disks
- FM-A: supports 12 hot-swappable SAS or SATA HDDs or SSDs. FM-B: supports 24 hot-swappable SAS or SATA HDDs or SSDs. FM-C: supports 8 hot-swappable SAS or SATA HDDs or SSDs. FM-D: supports 8 hot-swappable SAS or SATA HDDs, SSDs, or NVMe PCIe SSDs. NVMe PCIe SSDs do not support the hardware RAID function. NOTICE: The RH8100 V3 cannot be equipped with Huawei ES3000 V3 NVMe PCIe SSDs and Intel NVMe PCIe SSDs at the same time. When Huawei ES3000 V3 NVMe PCIe SSDs are installed, upgrade the ES3000 V3 driver to the latest version.
- RAID support
- A RAID controller card supports either of the following: RAID 0, 1, 10, and 1E. RAID 0, 1, 10, 5, 50, 6, and 60, a maximum cache capacity of 2 GB, and a supercapacitor for power-off protection. One or two RAID controller cards of the same model.
- Network port
- The LOM can be flexibly configured to provide either of the following ports: Up to two LOMs. 2-port GE-RJ45/4-port GE-RJ45/2-port 10GE SFP+/2-port 10GE RJ45.
- External ports and buttons
- Front panel: two USB 2.0 ports, one Power button, one UID button, one VGA port, and one touchable LCD diagnosis panel Rear panel: Two HFCs. Each provides two USB 2.0 ports, one VGA port, one serial port, one GE management network port, one UID indicator, and one LOM slot.
- DVD-ROM drive
- DVD-RW drive with one SATA port.
- Graphics card
- The graphics card is integrated into an HFC, and supports 32 MB display memory and a maximum resolution of 1280 x 1024.
- PSU
- You can choose 3000 W AC, 2000 W AC, or 2500 W DC PSUs. The PSUs can be configured in 2+2 or 1+1 redundancy mode.
- System management
- Supports remote management, WebUIs, virtual KVM, and standard protocols such as IPMI 2.0 and SNMP.
- Security
- Power-on password and administrator password.
- Chassis dimensions (H x W x D)
- 352 mm x 447 mm x 855 mm (13.86 in. x 17.60 in. x 33.66 in.)
- Installation space
- The server fits into a universal cabinet complying with the IEC 297 standard. Cabinet width: 19 in. Cabinet depth: > 1000 mm (39.37 in.) Guide rail installation requirements are as follows: L-shaped guide rails: apply only to a Huawei cabinet. Adjustable guide rails: apply to a cabinet with a distance between the front and rear mounting bars of 543.5 mm (21.40 in.) to 848.5 mm (33.41 in.). Holding rails: apply to a cabinet with a distance between the front and rear mounting bars of 610 mm (24.02 in.) to 914 mm (35.98 in.).
- Weight
- Maximum weight: 8-bay server: 152 kg (335.10 lb) 12-bay server: 160 kg (352.74 lb) 24-bay server: 165 kg (363.76 lb)
Packaging material weight: 20 kg (44.10 lb)
- Temperature
- Operating temperature: 5°C to 40°C (41°F to 104°F) (ASHRAE Class A3 compliant) NOTE: When the 64 GB DIMMs or high-power GPUs are configured, the maximum operating temperature is 35°C (95°F). Storage temperature: -40°C to +65°C (-40°F to +149°F) Temperature change rate: < 20°C/h (36°F/h) Long-term storage temperature: 21°C to 27°C (69.8°F to 80.6°F)
- Humidity
- Operating humidity: 10% RH to 90% RH (non-condensing) Storage humidity: 5% RH to 95% RH (non-condensing) Humidity change rate: < 20% RH/h Long-term storage humidity: 30% RH to 69% RH (non-condensing)
- Altitude
- ≤ 3000 m (9842.40 ft) The highest operating temperature decreases by 1°C (1.8°F) with every increase of 300 m (984.24 ft) in an altitude above 900 m (2952.72 ft). At an altitude of over 3000 m (9842.5 ft), only Titanium PSUs can be used. HDDs are not supported at an altitude of over 3000 m (9842.5 ft).
- Acoustic noise
- The data listed in the following is the declared A-weighted sound power levels (LWAd) and declared average bystander position A-weighted sound pressure levels (LpAm) when the server is operating in a 23°C (73.4°F) ambient environment. Noise emissions are measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109). Idle: LWAd: 6.6 Bels LpAm: 50.0 dBA Operating: LWAd: 6.9 Bels LpAm: 52.7 dBA NOTE: The actual sound levels generated during server operating vary depending on the server configuration, load, and ambient temperature.
- Corrosive air pollutant
- Corrosion rate of the copper test piece: < 300 Å/month (in compliance with the ANSI/ISA-71.04-2013 gaseous corrosion level G1) Corrosion rate of the silver test piece: < 200 Å/month
- Particulate pollutant
- The ISO14664-1 Class 8 requirements are met. You are advised to ask a professional organization to monitor particulate pollutants in the equipment room. There is no explosive, conductive, magnetic, or corrosive dust in the equipment room.
- Input voltage
- 2500 W DC PSU: –48 V DC to –60 V DC 2000 W AC PSU: 90 V AC to 264 V AC at 50 Hz or 60 Hz 240 V DC 3000 W AC PSU: 90 V AC to 264 V AC at 50 Hz or 60 Hz 240 V DC NOTE: The recommended current specifications for the external power circuit breaker connected to the RH8100 V3 are as follows: AC: 32 A DC: 63 A 380 V HV DC: 32 A
- Input current
- 2500 W DC PSU: 63 A 2000 W AC/DC PSU: 10 A 3000 W AC/DC PSU: 16 A NOTE: A 2000 W PSU uses a 25 A internal fuse.
- Rated output voltage
- 12 V DC
- Power consumption for 4–socket server
- Maximum power consumption: 1313.94 W Typical power consumption: 1041.54 W Minimum power consumption: 769.73 W
Price history
No price history has been recorded for this part yet.
Why buy from Prology
- Tested before dispatchEvery item is checked by our technicians before it ships.
- Warranty includedParts are covered by a Prology warranty – ask us for the terms.
- Fast shippingDispatched from our Australian and US locations.
- Real people, quick repliesQuotes and answers within 1 business day.
Request a quote for Huawei FusionServer RH8100 V3 Rack Server
Tell us the quantity and condition you need. Prology replies with a firm price and lead time within 1 business day.