Sunix USSUN-UPD2018

Sunix USB 3.1 10G & DisplayPort Alt

Featurs:

PCI Express Base Specification Revision 3.0 single-lane (x1).

Expands dual external USB3.1 Super-Speed plus Type-C port (DFP) on the system.

Compliant with Universal Serial Bus 3.1 specification Gen2.

Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 1.1.

Supports simultaneous operation of multiple USB 3.1, 3.0, USB 2.0 and USB 1.1 devices

Supports USB data transfer rate of 10G/5G/480/12/1.5 Mbps.

Specifications

Hardware

BUS PCI Express Spec 3.0, Single-Lane (x1)

Controller PCI Express USB 3.1 Host controller, Asmedia ASM1142

USB Standard eXtensible Host Controller Interface (xHCI) Rev1.1

IRQ & IO Assigned by System

USB Communication

Interface Universal Serial Bus 3.1 / 3.0 / 2.0 / 1.1

Speed SuperSpeed+(10Gbps), SuperSpeed(5Gbps), High Speed (480Mbps), Full Speed (12Mbps), Low Speed (1.5Mbps)

No. of Port 2-port

PCB Connector USB 3.1 USB Type-C port (Downstream Facing Port)

Protection ±15KV IEC61000-4-2 Air Gap Discharge

±8KV IEC61000-4-2 Contact Discharge

Video / Audio

Input Interface Standard DisplayPort Female, DisplayPort Ver1.2/1.1

Output Interface USB Type-C port

Audio Yes (audio pass-through)

Power

Source PCI Express Bus Power

Output Capacity USB Type-C Port:

Power Delivery +5VDC / 1.5A / each port

Note: Total power output capacity will be limited by system power supply.

Over Current Protection USB Type-C Port:

+5VDC / 1.5A / each port / Power Switch

Power Consumption 3.0W @ 3.3V (board only without power output to USB device)

Driver Support

Windows Windows 7 (X86/X64)

Windows 8.x / 10 (X86/X64) (Windows in-box driver)

Environment

Operation Temperature 0 to 60°C (32 to 140°F)

Operation Humidity 5 to 95% RH

Storage Temperature -20 to 70°C (-4 to 158°F)

Regulatory Approvals

EMC CE, FCC, VCCI, BSMI

Green RoHS, CRoHS, WEEE

Physical Characteristics

PCB Dimension 85.30x 55.75 mm

Bracket Standard 120 mm (Low Profile 80mm)

Bracket Space 1